Pros and Cons of DIY Spray Foam Kits in North Dakota

October 10, 2018 2:00 am Published by Leave your thoughts

Do you need to add insulation to your property? If an insulation project is on your calendar, you may be considering a DIY approach. Is this a good idea, or should you hire a contractor? That depends. There are pros and cons to DIY spray foam kits in North Dakota. It’s important to be aware of these and weigh them as you decide which approach to take.

Use the following guide to review your options and choose the best one for your skills, abilities and space. If you review the facts and are still unsure, don’t hesitate to contact your local professionals to handle the job.

Foam Kit Pros

  • Small projects are a cinch: Small insulation projects are often ideal for DIY spray foam kits in North Dakota. If you need to insulate around a door or window, these kits can be a great solution.
  • It’s economical: Hiring a contractor for a small insulation job will probably cost more than the purchase of the foam kit. For these small jobs, DIY-ers can usually save money by insulating the space themselves.
  • They are easy to access: Spray foam kits in North Dakota are readily available at local hardware stores. Homeowners can get the kit and complete the job whenever is most convenient for them, without scheduling an appointment with a contractor.

Foam Kit Cons

  • Clogs: When using a spray foam kit, it’s important to know what you’re doing. Pausing longer then 30 seconds causes clogs in the nozzle. If it becomes clogged, the nozzle will need to be switched out quickly so the blockage doesn’t spread into the hose and tanks.
  • Bad mixes: Sometimes the canisters aren’t hooked up properly, and this causes the mixture to go bad. If the product isn’t mixed properly, there might be a backup in the hose or gun, and all of the material in the tanks gets ruined.
  • Messes: The foam is very sticky. You’ll need to wear full protective gear and be very careful while you spray. If you don’t know what you’re doing, the results can be pretty messy.
  • Failures: If the material isn’t mixed properly, it won’t stick. It can fall away from the surface rather than adhering and insulating. This can also be caused by improper preparation of the surface.
  • Overspray: It is difficult for inexperienced DIY-ers to know how the foam will expand. It is challenging to apply the correct amount of foam. It is easy to end up with not enough insulation—or too much. In either situation, the homeowner wastes time and money in the process.

Leave It to the Pros

If you are an experienced DIY-er and have a small insulation project to complete, it might be worth the investment to purchase a spray foam kit in North Dakota. However, due to the many disadvantages of this option, it is often best to call on your local experts to handle the job. Experienced professionals will bring the knowledge, skills and tools needed to complete your insulation job and deliver the results you desire. Contact the pros at Interstate Insulation today to get started on your next project.

Categorised in:

This post was written by Writer

Leave a Reply

Your email address will not be published. Required fields are marked *